Versions

Screenshots

This app is intended for use by wireless professionals using Cambium/Motorola Canopy Wireless Internet equipment. This application enables the user to view statistics of the SM (Subscriber Module), AP (Access Point), TM (Timing Masters), and TS (Timing Slaves) using 2.4GHz, 5.2GHz, 5.4GHz, 5.7GHz and 900MHz frequencies.
The intent of this application is to determine the quality of your link, easily check the status of your link anywhere inside your office (depending on your wireless range coverage).
The Pro version also includes:
Link Capacity Test – Allows user to perform a test with variable number of packets, duration, and packet length.
Saving Options – Allows the user to save 6 Sites with 50 IP Addresses per site
Technical View - Shows realtime statistics of the Power Level and Jitter(SM and TS only)
INSTRUCTIONS:
To use this Cambium/Motorola Canopy LinkCheckerPro application, please follow the instructions below.
*** WIRELESS CONNECTIVITY ***
If you have a wireless router tied in to your existing Cambium/Motorola Canopy network.
Enable Wireless Connectivity on your iOS device by going to Settings -> Wi-Fi
Once connected open our "Cambium/Canopy LinkCheckerPro" application on your iOS device.

To Add/Edit/Delete a Site:
Scroll to the top of the drop down menu and click Add/Edit/Delete Site then use the text box to add the site or use scrolling drop down menu to select a site to Edit or Delete

To Add/Edit/Delete an IP Address:
Scroll to the top of the drop down menu and click Add/Edit/Delete Site then use the text box to add the site or use scrolling drop down menu to select a site to Edit or Delete

If you have a username/password set to this module please enter it in as well, if not please leave the username/password fields blank.

This application is only intended for users running firmware 10.5 or 11.0+ on your Cambium/Canopy equipment.