The NDSIII provides basic diagnostics for N i s s a n and I n f i n i t i cars. It is intended for newer cars that
have a 16-pin OBDII connecter and use Consult III protocol over CAN. Those are usually cars build between years 2007 and
now. The connector is typically located near the fuse box.
This application supports both, petrol and diesel cars. It communicates with the engine ECU using Consult III protocol. It uses the same communication protocol as the dealer diagnostic tool. This protocol is far more comprehensive than the generic ISO15765 protocol.
The current version of the app has following functions:
• Data Display with data logging
• Self Diagnostics
• Work Support with Clear Self Learn, Idle Air Volume Learn, Exhaust Valve T/C Learn and M/T Neutral Position Learn functions
• Dash Display with customisable gauges
• Video Recorder
The video recorder function saves an mp4 video file with accompanying data log file. Overlay software such as RaceRender can then be used to generate videos with custom data visualization.
A Bluetooth diagnostic adapter is required to connect to the car. This app is design to work with adapters build on the popular ELM327 chip. They are very well priced and available from many Internet suppliers or eBay. For a list of tested adapters please visit our website.
NOTE: There are a number of adaptors from China with fake ELM327 v2.1 chip. Those adaptors do not have all required commands and are not supported. Look for adaptors with v1.5 or v1.4 chip.
If you would like to test the application for compatibility with your car, try the free Lite version also available from Google Play store.