In this utility you can check and cure the broken pixels, stuck, subpixels and lazy pixels of your display
A broken / stuck pixel, a subpixel is a point or several dots of a screen matrix that do not correctly display the color. Sometimes they are almost invisible and you can be their owner without even noticing it. There are several methods for treating blind spots of the screen. Mechanical - physical impact directly on the affected area and software, which is offered by this utility. I strongly recommend not using the first method to experienced users, since it is dangerous for the screen matrix.
The utility works on all screen resolutions and is suitable for both phones and tablets with high resolution.
To visually identify broken, stuck pixels and subpixels, use the check. When checking, you can select two modes:
In automatic mode, fill colors smoothly change along the gradient.
In manual color, change only when you tap the user on the screen.
You should carefully examine the matrix on different screen fills and see if there are any points that differ in color. If you find them, then you have broken or stuck pixels.
If on any fill pixel has a black color - it's a broken pixel. These are the hardest to cope with and often are not curable at all.
If the pixel is black not on all the fillings - most likely it's a broken subpixel.
Still there are inverse and lazy pixels. Sometimes they can be confused with broken pixels, but it's easier to treat them.
If you have a semitransparent stain on the screen about the screen overheating or long work - the utility most likely will also help you with this.
The distributed problem of matrices is a phantom. They occur if your device does not go into hibernation for a long time and the pixels begin to burn out, creating a semi-transparent image of a screen saver or image that has been on the screen for a long time static. If you are the owner of a phantom - do not worry, most likely the utility will help you with this.
If you find broken, lazy and stuck pixels as well as phantoms, you can try to cure them. The program will use various tools to repair broken pixels. It can cure broken, stuck and dependent pixels, partial sub-pixel defects, Stuck sub-pixels, Dead or Broken (bad) pixels, Stuck versus dead pixels, Dark dot defects, Bright dot defects, phantoms (matrix burnup).
If within a few hours of program work the pixels do not come to life, then they can not be brought back to life in this way. Contact the service center.