상위 앱

Search for any app

Ampere

퍼블리셔: Braintrapp
가격: 무료 인 앱 구매 추가
평점:

앱 순위 ​변화

Ampere에서의 대한민국의 다운로드 수 순위 기록을 확인하세요.

순위 기록은 Google Play 앱 스토어에서 Ampere의 인기와 시간에 따른 변화를 보여줍니다, 또한, 국가, 카테고리, 디바이스별 Ampere 의 일일 성과를 추적할 수 있습니다.

무료 회원가입 후 더 많은 정보를 확인 해보세요!​

앱 스토어 최적화​​

모든 앱들의 상위 키워드를 추적하고 시간 추이 별 앱 검색 키워드 동향을 살펴 보세요.

앱 리뷰 및 평점

앱 리뷰와 평가를 살펴보고 중요한 사용자의 피드백​을 얻으세요. 버전, 국가, 날짜 범위 등으로 나누어 버그 및 제안 사항을 찾아 앱을 개선 시키세요.

피처드

언제 어디서 앱​이 앱 스토어에 노출 되었는지 날짜, 국가, 디바이스, 섹션 별로 파악해보세요.​

앱 설명

Did you ever felt, that one Charger/USB cable set charges your device really fast and the other not? Now, you can prove this with Ampere.

Measure the charging and discharging current of your battery.

PRO features:
- Widgets
- Notification
- Alerts on device
- Alerts on Android Wear

Not every device is supported because there are devices which lacks an appropriate measurement chip (or the interface) and they can not be supported at all. Please read the list of not supported phones at the end of the description.

The app is not meant to be mA accurate. It is only good for evaluate which Charger/USB cable combo is working the best for you on the same device.

----

Please read also the FAQ: http://goo.gl/R8XgXX

----

Start the app and wait ca. 10 seconds ("measuring" is on the display). After this time, the charging or discharging current will be shown.

The current depends on many things:
- Charger (USB/AC/Wireless)
- USB cable
- Phone type
- Current tasks running
- Display brightness
- WiFi state
- GPS state

Please don't use the readings on this app as concrete science. However, the readings are good enough to relatively measure how various chargers and USB cables fair on the same device.

If the app shows 0mA all the time, please use the settings option "Old measurement method". You can force the app with it to use the old measurement interface, if the Lollipop device has at least one.

Unfortunately some Samsung devices don't give correct (measured) values (e.g.: S5), just the maximum possible charging current with the actual USB cable/charger configuration. This is a firmware problem.

----

Background info: The app measures the charging/discharging current of the battery. If your phone is not connected to a charger, you see the discharging current which is negative. If you connect a charger then the current what the charger gives will be used to supply your phone and the remaining power will be charged into the battery.

If your phone consumes 300 mA without a charger connected (-300mA on the display), then a 500 mA charger will charge your battery maximum with 200 mA current (200mA on display).

----

Technical info: The displayed current is an average value from 50 measurements minus the 10 upper values and the 10 lower values. The displayed current can be shaky or unstable or even zero which means, that the Android system provides unstable values. Every company uses different battery types and other hardware making it difficult to get accurate results about your charger.

----

LiPo batteries don't draw the maximum for the full time it takes to charge the phone. If your battery is charged almost full then the charging current will be much less as by lower battery levels.

- A graph explaining LiPo charge stages: http://batteryuniversity.com/_img/content/ion1.jpg
- Dave's (EEVBlog) LiPo Charging Tutorial: http://youtu.be/A6mKd5_-abk

----

Phones/ROMS compatible only with "Old measurement method" switched on and selected the right "Measurement interface":
➤ HTC One M7 / M8
➤ LG G3

Phones/ROMS reported to be not working with this app:
➤ Galaxy Grand Prime - fortuna3gdtv
➤ Galaxy Note2 - t03g, t03gchn, t03gchnduos, t03gcmcc, t03gctc, t03gcuduos
➤ Galaxy S3 - d2att, d2spr, d2vmu
➤ Galaxy Tab4 7.0 - degas3g
➤ HTC Desire 510 - htc_a11ul8x26
➤ HTC One S (ville), X (endeavoru), XL (evita)
➤ HTC Sensation 4G - pyramid

Please do not give wrong rating, if your phone is one of the above. Not the app is wrong, but your phone does not support this kind of measurement yet.

If the app doesn't work on your device with pre-Lollipop Android version, then please read the first and the second posts in this XDA developer forum thread: http://goo.gl/pZqJg8 . Please post your problem with screenshots in the XDA thread.

Please read also the FAQ: http://goo.gl/R8XgXX

앱 스토어 최적화​​

앱을 검색할 때 가장 많이 사용하는 단어는? 올바른 키워드를 적어야 앱이 노출될 확률이 높아지고, 이는 곧 다운로드 및 매출 상승으로 이어집니다. App Annie는 수백 개의 키워드를 추적하여 앱의 다운로드 수가 증가하고, 경쟁자들이 사용하는 키워드를 보다 잘 이해할 수 있도록 돕습니다.

앱 리뷰 및 평점

리뷰와 평점을 통해 Ampere 에 대한 유저들의 생각을 알아보세요.

4.6

243396 랭킹

App Annie를 통해서 수많은 앱들의 정보 및 앱 업계 현황을 확인하세요.