상위 앱

앱 찾기

Torque plugin for Perodua cars full version

퍼블리셔: SAUKintelli
가격: 5.89 USD
평점:

앱 순위 ​변화

Torque plugin for Perodua cars full version에서의 대한민국의 다운로드 수 순위 기록을 확인하세요.

순위 기록은 Google Play Store 앱 스토어에서 Torque plugin for Perodua cars full version의 인기와 시간에 따른 변화를 보여줍니다, 또한, 국가, 카테고리, 디바이스별 Torque plugin for Perodua cars full version 의 일일 성과를 추적할 수 있습니다.

무료 회원가입 후 더 많은 정보를 확인 해보세요!​

앱 스토어 최적화​​

모든 앱들의 상위 키워드를 추적하고 시간 추이 별 앱 검색 키워드 동향을 살펴 보세요.

앱 리뷰 및 평점

앱 리뷰와 평가를 살펴보고 중요한 사용자의 피드백​을 얻으세요. 버전, 국가, 날짜 범위 등으로 나누어 버그 및 제안 사항을 찾아 앱을 개선 시키세요.

피처드

언제 어디서 앱​이 앱 스토어에 노출 되었는지 날짜, 국가, 디바이스, 섹션 별로 파악해보세요.​

앱 설명

MAY HAVE ISSUES WITH ANDROID9! Please try with free version first.
This is the full version of Torque plugin for Malaysian made Perodua cars, particularly older cars thatdoes not support generic OBD protocols. Read real time data, read engine status, read and erase error codes...!!

This is the full version with access to all available sensors and features.
For testing purpose, we advise you to try the free version. You can get it from Google Play (https://play.google.com/store/apps/details?id=obd.saukintelli.com.perodua) and please revert to me for issues. My email address as below.

IMPORTANT..!!! …Prerequisite:

1. This is a Torque Pro plugin. You need to get Torque Pro installed in your device. This plugin will NOT work alone. Also, make sure you use later versions of Torque Pro. Torque with too old version would not be supported.
2. You need ELM327 compliant adapter. There are a lot of cheap adapters out there that does not fully support ELM327 commands. Get adapters confirmed to work from me or from ahmad hamidon (you can get it from http://bit.ly/obd2malaysia ).
3. Please also make sure you follow the instruction below. And make sure connection to ECU is OK before scan error, erase error or check the status to avoid app crashes.

Important notes..!

Later versions of android, for saving battery life, there is phone setting to stop apps from starting automatically. Please ensure you have set this plugin to autostart. The same thing will need to be done if you have autostart manager in your device.

Typically, the settings are in battery settings of the device, or in apps settings --> battery management


Installation procedures:

New vehicles with new engine such as Axia does not require any setup, except for item no 1 below. Vehicles with older engines are supported by this plugin and requires special setup as below. Please try without setup first. Some perodua such as MyVi Lagi Best, may use protocol similar to perodua 1.5 litre engines. As such, exploring different vehicle profile setup might help.

1. Please uninstall the free version of the plugin. Otherwise it may disrupt the operation of this full version plugin.

2. This plugin requires full access to OBD device. Check the 'Allow plugin full access' in Settings --> Plugins

3. For older 1.3 litre engines or smaller, create a new vehicle profile in Torque. Under Menu, select 'Vehicle Profile'. then click 'create new profile'...

4. Name the profile 'PERODUA1.3'. Scroll to the bottom and click 'Show advance settings'

5. Scroll to the bottom. For 1.3 litre engines, in 'Preferred OBD Protocol' select 'ISO 14230(fast init,10.4baud)'

6. Click 'Save'". Note that some newer 1.3 litres of below engines does not require this setup.

7. For 1.5 litre engines or some newer 1.3 engines such as Myvi LagiBest, create vehicle profile as no.2 above, but name it “PERODUA1.5”. and for the OBD protocol use the “ISO 15765-4 CAN (11bit 500k baud)”. Refer no 3 & 4 above.

8. Create another vehicle profile and name it 'Blank' scroll to the bottom and 'Save'. Do not put any advanced settings

9. Select the correct Perodua vehicle profile you created earlier everytime you want scan by tapping on Menu --> 'Vehicle Profile'-->select the ones that you created. For other vehicles, use the 'Blank' profile.

10. Create custom PIDs from Settings --> Manage extra PID/Sensors --> tap settings and select 'Add predefined set'. Select 'Perodua PIDs

11. Create displays in 'Realtime Information' by tapping Realtime Information --> go to empty page -->tap menu --> Add display -->pick your meter type --> Select PIDs that start with {PERODUA}.

12. Make sure you go to this page every time you want to use Perodua cars. Otherwise, Torque wouldn't connect to your ECU. You may need to wait for a while at this page for Torque to connect to your car

13. Now you are ready to use the Torque for scanning your car.

14. To scan error codes (or other features), tap on this plugin logo (Perodua OBD).

앱 스토어 최적화​​

앱을 검색할 때 가장 많이 사용하는 단어는? 올바른 키워드를 적어야 앱이 노출될 확률이 높아지고, 이는 곧 다운로드 및 매출 상승으로 이어집니다. App Annie는 수백 개의 키워드를 추적하여 앱의 다운로드 수가 증가하고, 경쟁자들이 사용하는 키워드를 보다 잘 이해할 수 있도록 돕습니다.

앱 리뷰 및 평점

리뷰와 평점을 통해 Torque plugin for Perodua cars full version 에 대한 유저들의 생각을 알아보세요.

3.3

56 랭킹

App Annie를 통해서 수많은 앱들의 정보 및 앱 업계 현황을 확인하세요.