상위 앱

Search for any app

NAK T-100 Audio Analyzer

퍼블리셔: Chen Wang
가격: 24.99 USD

앱 순위 ​변화

NAK T-100 Audio Analyzer에서의 미국의 다운로드 수 순위 기록을 확인하세요.

순위 기록은 Mac Store 앱 스토어에서 NAK T-100 Audio Analyzer의 인기와 시간에 따른 변화를 보여줍니다, 또한, 국가, 카테고리, 디바이스별 NAK T-100 Audio Analyzer 의 일일 성과를 추적할 수 있습니다.

무료 회원가입 후 더 많은 정보를 확인 해보세요!​

앱 스토어 최적화​​

모든 앱들의 상위 키워드를 추적하고 시간 추이 별 앱 검색 키워드 동향을 살펴 보세요.

앱 리뷰 및 평점

앱 리뷰와 평가를 살펴보고 중요한 사용자의 피드백​을 얻으세요. 버전, 국가, 날짜 범위 등으로 나누어 버그 및 제안 사항을 찾아 앱을 개선 시키세요.

피처드

언제 어디서 앱​이 앱 스토어에 노출 되었는지 날짜, 국가, 디바이스, 섹션 별로 파악해보세요.​

앱 설명

NAK T-100 is a lightweight and all-inclusive audio analyzer for inspecting analog audio devices on computer. It is capable of completing 7+ conventional audio measurements in a single setup without swapping a stack of physical instruments. This makes it an agile tool to quickly check whether a given audio device performs to its specifications. Or during a service/repair/modify project, this is a less overkill and more cost-effective tool for conducting general audio measurements on desk top. Some of the key functions are specifically optimized for tuning analog tape players/recorders.

The app features modern DSP core with traditional analog skin. It adopts the "Skeuomorphism" design philosophy to offer era-specific operational experience in working with analog audio devices. However, the underlaying engine works purely from digital domain after all, which does not have to follow the analog measurement principles and yield strict identical readings. Typical tolerances across typologies of test instruments should be expected.

Features and Specifications
[!generator!]
21 spot sinusoidal plus pink
[!level!]
-80dB ~ +10dB
(extendable to +30dB with physical input attenuator),
RMS or peak, 0dB = 1.0V (after calibration)
[!ac!]
10mV ~ 300mV, 0.1V ~ 1V,
1V ~ 10V (with physical input attenuator)
20Hz ~ 20kHz
Requires calibration with reference AC volt-meter
[!thd!]
0.01% ~ 0.3%, 0.1% ~ 3%
400Hz/1000Hz
[!speed!]
3000Hz/3150Hz ±3%
[!wow!]
0.01% ~ 0.3%, 0.1% ~ 3%
Quasi-Peak (2-sigma) DIN 45507
WRMS (2-second moving window) DIN 45507
Peak unweighted
RMS unweighted
[!signal!]
-100dB ~ -10dB
IHF-A weighted
[!frequency!]
20 ~ 20kHz (extendable to 26kHz at 96kHz sample rate)
-100dB ~ +10dB
Gaussian white noise
Pink noise
Sweep frequency (asynchronous)
[!lissajous!]
Ellipse figure with time stabilizer
[!oscilloscope!]
Two channel, non-quantitative
[!meter!]
RMS: 300mS (capacitive)
Peak: 10mS raise, 2000mS fall (capacitive)

Please note:
1. This app is by no means a replacement of laboratory grade instrument.
2. This app is intentionally designed in favour of simplicity and convenience without excessive configurability.
3. This app operates in two switchable modes: Basic and Scope.
4. The Basic mode is the primary working mode. Its UI panel may be unfamiliar to new users at first. But the same ergonomics has been repeatedly proven in the former practices.
5. The Scope mode is a GUI add-on that displays complex measurement results in 2-dimensional plots. It is a lite graphic console without a set of pro implications.
6. The specifications may vary depending on actual sound card used.
7. Calibration will be needed prior to working with a specific audio device on a specific computer.
8. The computer must have stereo audio input (line-in) and stereo audio output (regardless of built-in or external) in order to allow the app functioning properly.
9. Relatively faster computer with less busy multi-tasking workload is recommended.

앱 스토어 최적화​​

앱을 검색할 때 가장 많이 사용하는 단어는? 올바른 키워드를 적어야 앱이 노출될 확률이 높아지고, 이는 곧 다운로드 및 매출 상승으로 이어집니다. App Annie는 수백 개의 키워드를 추적하여 앱의 다운로드 수가 증가하고, 경쟁자들이 사용하는 키워드를 보다 잘 이해할 수 있도록 돕습니다.

앱 리뷰 및 평점

리뷰와 평점을 통해 NAK T-100 Audio Analyzer 에 대한 유저들의 생각을 알아보세요.

0

0 랭킹

App Annie를 통해서 수많은 앱들의 정보 및 앱 업계 현황을 확인하세요.